Platon is a rugged, dimpled high-density polyethylene (HDPE) membrane for below grade foundation walls. It creates a vapor impermeable barrier and an air gap, allowing for moisture control. The wet soil is kept away from the foundation walls and if any moisture does find its way past the membrane, it is carried to the foundation drain by the air gap drainage path. It is economical and easy to install in any weather condition with the ability to easily bridge cracks of up to ¼” (6mm) in width. An ideal solution to be used with a peel-and-stick membrane.
Colphene ICF is high quality peel-and-stick membrane composed of SBS modified bitumen with tri-laminate woven polyethylene facer and silicone release film. The membrane is designed to be used for either waterproofing or damproofing for below grade ICF foundation walls. It has high tensile strength and puncture resistance while maintaining great flexibility.
It can be installed with or without primer over clean and dry ICF walls depending on the exterior temperature and application. It has a very consistent thickness (40mil / 1mm) and comes in rolls of 36in x 75ft (0.9m x 22.9m). Colphene ICF is available in two grades, summer and winter, with application temperatures of 50-122°F (10-50°C) and 14-50°F (-10-10°C) respectively.
Elastocol Stick H2O is a single component water based primer designed to be used in conjunction with self-adhering waterproofing membranes on most substrates. It is an excellent choice when the use of solvent based primer is not recommended. Can be applied with either a brush, spray gun or a roller.
DuRock’s Fiberglass Mesh is a 5oz (142g) high impact alkali-resistant fiberglass mesh designed to be used with B2000 parging base coat. Provides increased flexural strength to the base coat while improving the bond to the substrate. It comes in rolls of 39”x144’ (1m x 44m).
B2000 is an acrylic-modified cementitious dry mix base coat designed for use over Expanded Polystyrene (EPS) Insulated Concrete Forms (ICF). It forms a strong but flexible crack resistant base coat that is intended for use on the exterior, above grade portion of ICF foundation walls. It has high flexural and bond strength, is vapor permeable, with low water absorption and excellent freeze-thaw resistance.