» build to a higher standard

Amvic Quick Estimator

Result can be best viewed in full screen mode (maximized browser) else refresh windows in case contents are not displaying correctly.

Project Detail

Your Name:* Project Name:* 
Project Location:* Your Email:

Wall Input

Section Height(ft) Length(ft) Wall Thickness(in) Area of Wall Openings(ft^2) NOS of 90° Outside Corners NOS of 90° Inside Corners NOS of 45° Corners NOS of T Block Wall Type
1
2
3
4
5
6

Note: "N/A" represent unavailable section of related core thickness.

Floor/Roof Input

Section Width(Shortest Dimension(ft)) Length(Longest Dimension(ft)) Concrete Topping(in)
1
2
3
4
5
6

The AMVIC Quick Calculator is for the purpose of quickly gaining a general idea of the amount of materials required for a AMVIC project. For the purposes of obtaining a 'rough' estimate for reinforcement quantities the Quick Estimator uses the rebar spacings shown below. Actual Reinforcement requirements will be different for each construction project.

Above-grade: 16 inch and 24 inch for horizontal and vertical rebar spacing, respectively.
Below-grade: 16 inch and 18 inch for horizontal and vertical rebar spacing, respectively.

AmDeck Floor: Engineering reinforcement design and temporary shoring distances must be provided by a licensed Professional Engineer.

Please contact your territory manager for the comprehensive version of the Amvic Estimating Software (AES) or for a quote on your ICF project.