Who are you:         

 
  About AmvicBlog - Around the Block  
Around the Block

Insulated Concrete Forms (ICF) Walls AmvicIn our effort to provide the architectural and building communities with more than just products, but also the power of added value, we have decided to accompany our new website with a blog.

The intention of ‘Around the Block’ is to discuss trends, challenges, issues and other topics that are relevant to the ICF industry.  Our blog entries are collaboratively developed by team of our engineering, sales and marketing departments as well as our wide network of distributors in order to bring you the highest quality content possible.

We are very excited about this endeavor and hope that this will be a place where you can find useful content related to the ICF industry that will help you advance your business and add value for your customers.


 

Add to Technorati Favorites

  

Archive
  

Search
  

Around the Block
May 23

Written by: Blog Editor
5/23/2008 9:02 AM

Eastern subterranean termites are the most common and widely distributed termites in the United States.  They are often found in the eastern and central states, with the heaviest concentration in south-eastern states. Like all termites, they eat wood and often invade buildings in their search for food which can be seriously damaging to the structure.

 

Termites and ICF Walls

 

A major benefit of Insulated Concrete Form (ICF) walls is that they are comprised of polystyrene and concrete and therefore do not offer any food value for termites, ensuring that the structure of the walls will stay intact.  Subterranean termites can however burrow through the EPS foam to reach areas where a food source exists, such as wood roof trusses, wood floor joists and hardwood flooring. This can be particularly dangerous when EPS is used below grade since termites can burrow upwards to the roof without being discovered.

 

The following are three categories of termite control and prevention that can be used to protect against termite infestation: 

  • Physical Barriers
    • Waterproofing and termite barrier system
    • Chemical soil treatment
    • Metal or plastic termite shields
    • Particle sized barrier
    • Wire Mesh
  • Suppression
    • Termite baits
    • Trap Treat Release (TTR)
  • Site Management (not to be used as a single source of protection)

Recommendations for Termite Prevention and Control

  • Reduce or eliminate wood structural elements. If wood cannot be eliminated, use treated wood or wood that is naturally resistant to termites.
  • Use more than one line of defense from the three categories or termite control and prevention listed above.
  • Always retain the services of a licensed/professional Pest Control Operator (PCO) to implement commercial termite control and prevention methods.
  • Monitor and inspect the structure on a regular basis for any signs of termite infestation or damage.

Copyright ©2008 Amvic Inc.

Tags:

2 comments so far...

Re: Termites and ICF Construction

Doesn't Amvic use Perform Guard in the Poly?

By Lee Payne on   5/29/2008 8:27 AM

Re: Termites and ICF Construction

Thank-you for your question Lee. Amvic does not use perform guard in the manufacturing of our Insulated Concrete Forms (ICF) or other expanded polystyrene (EPS) products. There is a considerable amount of steam (moisture) used in the manufacturing process of EPS insulation. Perform guard is washable and therefore does not consistently coat the EPS beads, leaving the potential for void areas. Amvic recommends using other more effective and tested methods for termite protection as mentioned above.

By blogeditor on   5/29/2008 1:08 PM

Your name:
Title:
Comment:
Security Code
Enter the code shown above in the box below
Add Comment    Cancel  
  

501 McNicoll Ave ∙ Toronto, ON ∙ M2H 2E2 ∙ Canada ∙ (416) 410-5674 or 1 877-470-9991∙ Fax: (416) 759-7402

Login to Dealer

Company Overview  Amvic + The Power of Added Value  Blog - Around the Block  Partnerships  Brochures    Login   Terms Of Use   Privacy Statement   Links      Top